Nokia E-Series User Manual page 64

User name — Enter your user name if required by
the service provider. User names are often case-
sensitive and provided by your service provider.
Prompt password — Select Yes
password each time you log into a server or
save the password in your device memory and
automate the login.
Password — Enter your password if required by the
service provider. The password is often case-
sensitive and provided by the service provider.
Authentication — Select Secure
password always encrypted, or
your password encrypted when possible.
Homepage — Enter the web address of the page
you want to display as the home page when you use
this access point.
4. After defining the settings, select
Advanced settings to define the advanced settings or
Back to save the settings and exit.
Advanced internet access
point settings for packet data
(GPRS)
Select Menu Tools Settings
Access points.
After setting up a basic internet access point for packet
data (GPRS), select Options Advanced
define the following advanced settings:
Network type — Select IPv4 or IPv6
64
protocol type. The internet protocol defines how data
is transferred to and from your device.
Cyan Cyan Cyan Cyan
Phone IP address
device. Select Automatic
the device IP address. This setting is shown only if you
to enter your select Network type
No to
DNS address — Select
Secondary DNS address
if required by your service provider. Otherwise, the
name server addresses are provided automatically.
Proxy server address
server. Proxy servers are intermediate servers used by
to send your
some service providers between a browsing service and
Normal to send its users. These servers may provide additional security
and speed up access to the service.
Set up an access point for
WLAN manually
Options
1. Select Menu Tools
Access points.
2. Select Options
access point, or select an existing access point from the
list and then Options
the access point as a basis for the new one.
3. Define the following settings.
Connection name
Connection
the connection.
Data bearer
WLAN network name
settings, and
identifier (SSID), that is, the name that identifies the
specific WLAN, select
as the internet
network from the WLANs in range, select
networks.
Magenta Magenta Magenta Magenta Yellow Yellow Yellow Yellow Black Black Black Black
— Enter the IP address of your
to have the network provide
IPv4.
Primary DNS address and
and enter their IP addresses,
— Enter the address of the proxy
Settings Connection
New access point to create a new
Duplicate access point to use
— Enter a descriptive name for
— Select Wireless LAN.
— To enter the service set
Enter manually. To select the
Search for