Zte MF30 User Manual page 55


Default Policy: Set how to handle the packet if none of the rules
matches.

MAC address: Set the MAC address that will be filtered.

Dest IP Address: Set the destination IP address that will be filtered.

Source IP Address: Set the source IP address that will be filtered.

Protocol: Set which protocol will be used for filtering.

Dest Port Range: Set the destination port numbers that will be filtered

Source Port Range: Set the source port numbers that will be filtered.

Action: Set how to handle the packet if it matches with the rule.

Comment: type comment for the filter settings.
Note：Filtering rules are matched one by one, if met this provision, it will not
continue to match the rules listed below.
55