aidapt VP185 Usage And Maintenance Instructions page 4

ASSEMBLY INSTRUCTIONS (continued)
The rollator is supplied fully assembled in its folded position. To unfold the rollator
follow these instructions.
Step 1:
Open the rollator by pulling the handles away from each other (see fig. 1)
Step 2:
Push down on the seat (see fig. 2) making sure that the seat arms click into the seat
brackets (see fig. 3). DO NOT USE THE ROLLATOR UNLESS THE SEAT ARMS
ARE FULLY LOCKED INTO THE SEAT BRACKETS.
Step 3:
Lower the rear legs by pulling up both sides of the red catch (see fig. 4) and lowering
the leg into position. Repeat step 3 for the other rear leg. A click will be heard when
the leg has locked into place. DO NOT USE THE ROLLATOR UNLESS THE LEG
HAS SECURELY LOCKED INTO PLACE.
Step 4:
Lower the front wheels by pushing the red catch down (see fig. 5) and lowering the
wheel into position. Repeat step 4 for the other front wheel. A click will be heard
when the wheel has locked into place. DO NOT USE THE ROLLATOR UNLESS
THE WHEEL HAS SECURELY LOCKED INTO PLACE.
fig. 2 fig. 3
fig. 1
fig. 4 fig. 5