Operation; Maintenance - Makita DUR189 Instruction Manual

CAUTION:
wrench inserted in the tool head. It may cause
When not in use, store the hex wrench as shown in the
1
1. Hex wrench

OPERATION

Correct handling of tool
WARNING:
Always position the tool on your
right-hand side. Correct positioning of the tool allows
for maximum control and will reduce the risk of seri-
WARNING:
control of the tool at all times. Do not allow the
work vicinity. Failure to keep control of the tool
operator.
WARNING:
To avoid accident, leave more
than 15m (50 ft) distance between operators when
two or more operators work in one area. Also,
arrange a person to observe the distance between
operators. If someone or an animal enter the
working area, immediately stop the operation.
Attachment of shoulder harness
CAUTION:
Always use the shoulder harness
attached. Before operation, adjust the shoulder
harness according to the user size to prevent
fatigue.
Connect the clasp of the shoulder harness to the
hanger part of the housing. Put the shoulder harness
on. Be sure that the buckles are locked completely in
place.
1
1. Clasp 2. Hanger
Detachment
The buckle is provided with a means of quick release.
Simply squeeze the sides of the buckle to release the
tool.
1
1. Buckle

MAINTENANCE

WARNING:
switched off and battery cartridge is removed
before attempting to perform inspection or main-
tenance on the tool. Failure to switch off and remove
the battery cartridge may result in serious personal
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
12 ENGLISH
2
Always be sure that the tool is