Day Programming - Danfoss GreenCon RC-T2 Installation Manual

Installation Guide
Press and hold "M", within 6 seconds, short press " > "
to lock keyboard, icon "
repeat this to unlock.
7. Reset
During power off, press and hold both "M" and" < ",
" > " for 10 seconds, thermostat will be reset and
restart.
8. Programming

1. 5-2 day programming

To enable this function, please configure P01 to "02"
in parameter setting.
When this function is enabled, system automatically
changes setting temperature four times per day.
Both setting temperature and event time can be
modified.
Programming function allows users to define tem-
perature setting for 4 time period during workdays
(Mon-Fri) and weekend (Sat-Sun)
2. Default set up
Starting time and temperature for each period
7:00 / 18 °C / 28°C
9:00 / 22 °C / 26°C
18:00 / 18 °C / 28°C
21:00 / 15 °C / 30°C
3. Programming of workday set up;
Long press"
Thu.Fri" icon displays;
Press " < " or " > " to adjust starting hour of first event,
Danfoss Heating Solutions
GreenCon RC-T2/T4
" will be displayed on LCD,
" for 5 seconds till "Mon.Tue.Wed.
VIE2D22P
GB
9