Replacement Parts And Accessories - Lectrosonics R400A Instruction Manual

Replacement Parts and Accessories

DCR12/A4U
AC power supply with US type 2-pin plug on
housing, 100 to 240 VAC input; 12 VDC 400 mA
regulated output
A500RA(xx)
UHF flexible whip antenna with Right-Angle BNC
Specify frequency block (last two digits (xx)
specify frequency block, for example: A500RA21,
A500RA22, etc.)
SNA600A
Collapsible dipole antenna adjustable from 550
MHz to 800 MHz. Ideal for situations where a full
360 degree receiving pattern is required as op-
posed to a directional pattern.
ALP Series Antennas
The "Shark fin" Log Periodic Dipole Array (LPDA)
provides useful directional pattern over 500 to
800 MHz range. Ideal for portable applications
including temporary setups for field production.
ALP Series antennas are not intended to be left
outdoors permanently.
ARG Series Coaxial Cables
Coaxial cables for remote antennas are available
from Lectrosonics in a variety of lengths - from 2
to 100 ft. Cables include Velcro tie wraps.
35664
Strip of four adhesive backed feet, 0.75 inches
square.
RMPR400B-1
Single-space rack conversion kit for single
R400A receiver. Includes extension cables for
mounting antennas on front panel.
RMPR400B-2
Single-space rack conversion kit for dual R400A
receivers. Includes extension cables for mount-
ing antennas on front panel.
Rio Rancho, NM
UHF Wireless Diversity Receiver
DCR12/A4U
A500RA(xx)
SNA600A remote dipole antenna
ALP Series
17