Setting Up Con@Ctivity; Con@Ctivity Via The Home Wifi Network (Con@Ctivity 3.0) - Miele DA 3668 Operating And Installation Instructions

Before using for the first time

Setting up Con@ctivity

Con@ctivity is the direct communication
system between an electric Miele hob
and a Miele cooker hood. It enables the
cooker hood to operate automatically
depending on the operational state of a
Miele hob with onset controls.
– When the hob is switched on, the
cooker hood lighting comes on
automatically and then after a short
time the fan also comes on.
– The cooker hood selects the power
level automatically during cooking.
The power level selected by the
cooker hood depends on the number
of cooking zones being used and
their power levels.
– After switching the hob off the fan
and the hob lighting will switch off
automatically after a specified period
of time.
See "Operation" for detailed information
about this function.
22
This cooker hood can be operated
with the Con@ctivity function via a
WiFi connection (Con@ctivity 3.0) or
via a wireless connection (Con@ctivity
2.0).
Once the WiFi connection has been
established (Con@ctivity 3.0), the
remote control can no longer be used.
The cooker hood can continue to be
operated via its control panel.
Once the connection has been
established via the home WiFi
network, the cooker hood can be
controlled remotely with the
Miele@mobile app.
Con@ctivity via the home WiFi
network (Con@ctivity 3.0)
Prerequisite:
– Home WiFi network
– WiFi enabled Miele hob
 Connect the cooker hood and hob to
your home WiFi network (see "Setting
up Miele@home").
The Con@ctivity function will be
activated automatically.