Miele DA 3668 Operating And Installation Instructions page 55

For safety reasons it is essential that
the cooker hood is only fitted into a
wall unit which is already installed. It
cannot be fitted into the wall unit
before the wall unit is installed.
 Fit the cooker hood into the wall unit
from below. Guide it back over the
safety notches until it is correctly
hung in the wall unit.
To secure the cooker hood in the wall
unit, the deflector plate must be
extended. Electrical connection is
required to do this.
Before connecting the cooker hood
to the electricity supply, please see
"Electrical connection" and "Warning
and Safety instructions".
 Connect the cooker hood to the
electricity supply.
 Press the  button on the remote
control.
The fan switches on and the deflector
plate comes out.
 When the deflector plate is extended,
disconnect the cooker hood from the
electricity supply.
The fan will switch off, the deflector
plate remains extended.
Installation
55