Options; Before First Use - AEG FSE83806P User Manual

12 www.aeg.com
3. Press on/off to confirm the setting.

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you select non compatible
options, the appliance
automatically deactivates
one or more of them. Only
the indicators of the still
active options are on.
If an option is not applicable
to a programme, the related
indicator is off or it flashes
quickly for a few seconds
and then goes out.
Activating options can affect
the water and energy
consumption as well as the
programme duration.
7.1 XtraDry
Activate this option to boost the drying
performance.
XtraDry is a permanent option for all
programmes other than
automatically activated in next cycles.
This configuration can be changed at any
time.
Every time
activated, XtraDry is off and
needs to be chosen
manually.
Activating XtraDry deactivates TimeSaver
and vice versa.

8. BEFORE FIRST USE

1. Fill the rinse aid dispenser.
2. Open the water tap.
How to activate XtraDry
Press
The related indicator is on.
The display shows the updated
programme duration.
7.2 TimeSaver
The TimeSaver allows to reduce the
duration of a selected programme by
approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
By default, TimeSaver is off, but it is
possible to activate it manually. This
option cannot be combined with
XtraDry.
How to activate TimeSaver
Press
The related indicator is on.
The display shows the updated
programme duration.
7.3 ExtraHygiene
. It is
This option provides better hygiene
results by keeping the temperature at 70
°C for at least 10 minutes during the last
rinsing phase.
is
How to activate ExtraHygiene
Press
The related indicator is on.
The display shows the updated
programme duration.
3. Start a program to remove any
.
.
.
processing residuals that can still be
inside the appliance. Do not use