Siemens SIMATIC ET 200SP Manual page 12

Product overview
2.3 Functions
System environment
The communication module can be used in the following system environments:
Applications
Distributed operation in an S7-1500
system
Distributed operation in an S7-300/400
system
Distributed operation in a third-party
automation system
Information on using the communication module in a third-party system is available in the
1)
programming and operating manual CM PtP operation with PROFINET controller
(http://support.automation.siemens.com/WW/view/en/59062563).
Additional information
Information on configuration and programming of the CM PtP communications module is
available in the function manual CM PtP - Configurations for point-to-point connections
(http://support.automation.siemens.com/WW/view/en/59057093) and in the information
system of the TIA Portal.
12
Components required
CPU 151x
•
IM 155-6
•
CM PtP
•
Power supply (optional)
•
CPU 31x / CPU 41x
•
IM 155-6
•
CM PtP
•
BaseUnit
•
Third-party automation system
•
IM 155-6
•
CM PtP
•
Configuration
STEP 7 (TIA Portal)
STEP 7 (TIA Portal)
STEP 7 with integration of a GSD file
GSD file imported to/installed in the
engineering system
CM PtP communication module (6ES7137-6AA00-0BA0)
Manual, 01/2013, A5E03790792-01
1)