Accessories - Siemens SIMATIC ET 200SP Manual

Product overview

2.2 Accessories

Properties
The communication module has the following properties:
● Technical properties
● Supported system functions
Additional information
Additional information on the properties of the CM PtP can be found in the function manual
CM PtP - Configurations for point-to-point connections
(http://support.automation.siemens.com/WW/view/en/59057093).
You can find additional information on the design of the ET 200SP and the associated
modules in the system manual ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293).
2.2 Accessories
ET 200SP accessories
Accessories and spare parts for ET 200SP can be found in the System Manual ET 200SP
distributed I/O system (http://support.automation.siemens.com/WW/view/en/58649293).
Online catalog
Additional order numbers for ET 200SP can be found on the Internet
(http://www.siemens.com/industrymall) in the online catalog and online ordering system.
10
– RS232 interface (via BaseUnit)
– RS422/485 interface (via BaseUnit)
– short-circuit proof
– electrically disconnected
– Protocols: 3964(R), Modbus master (RTU), Modbus slave (RTU), Freeport and USS
with instructions
– Firmware update
– Identification data I&M0
– Parameter re-assignment in CPU RUN mode (using instructions)
– Diagnostic interrupts
CM PtP communication module (6ES7137-6AA00-0BA0)
Manual, 01/2013, A5E03790792-01