Related Manuals for Drinkpod 1000 Series
Summary of Contents for Drinkpod 1000 Series
- Page 1 1000 SERIES DP1000(B) OWNER� MANUAL Please read this manual carefully prior to operating your Drinkpod. Retain for future reference.
-
Page 2: Safety Caution
Prevent Freezing Child Supervision • WARNING: To avoid any hazards due to instability of the appliance, it must be installed, Never store or expose your Drinkpod in an Unsupervised children should not be allowed to Maintenance Notes Features & Specifications maintained, and repaired, in accordance with environment less than 32 °. - Page 3 What's 25’ Industrial Grade PVC Tubing Cold Water Selector 3/4” x 3/4” x 1/4” Steel Union Adapter included 1/4” PVC Shutoff Valve Dispense Water Button Quck Fill Mode Selector (10 Seconds) Flush Connector Service & Support Letter Condenser Active Status Light Quickstart Guide Heater Active Status Light Eco Mode Active Status Light...
-
Page 4: Water Filter
water Filter Features Model DP1000(B) system & Specs Rated Power 555 Watts Heating Power 420 Watts Cooling Current 2.0 A Hot Water Production & Rate: 1.01 gal/hr (4 L/h) ≥ 185° F (85° C) Storage: 0.24 gal (0.9 liter) Storage Deliciously Pure &... -
Page 5: Getting Started
Optimally a kitchen sink. • 1x Pair Of Pliers • 1x Drill & Drill Bit Setup & If you’ll need/want to create a more direct route for your Drinkpod’s water Getting source line). • 1x Sick Beat (song)* Started Step 2 Recommended for Unpack product. - Page 6 4” of piercing saddle joint. watersource to clearance on the right If, for any reason, Drinkpod). & back sides to allow you are unable for airflow. to complete the Step 5 installation using...
- Page 7 Step 6 Step 8 Step 7 Twist cold water Screw union adapter (clockwise) Unscrew source valve down onto cold water shutoff valve. Do Step 10 (counter- clock-wise to not tighten with pliers more than 1/4 Screw kitchen sink clockwise) turn off. turn.
- Page 8 Step 13 Firmly slide 25’ x 1/4” PVC tubing Step 11 over quick Unscrew connect adapter Step 14 compression nut up to (but not Firmly screw the from quick overlapping) the compression nut connect adapter. threads. back on to quick connect adapter.
- Page 9 Step 16 can reach from your water so that it reaches extend quick- Use scissors or knie source to the Drinkpod. Water Inlet with at gripping seals on to cut approximately least several feet of shutoff valve. Ensure 1’...
- Page 10 2. Twist counter clockwise. Firmly push the open end of new 3. Gently pull filter out/down. short tubing into Cold Water Inlet, on the back of your Drinkpod until you cannot push it any further. STOP!!! Step 24 Before proceeding, Open 1/4”...
- Page 11 Always Flush New Pre & Post Step 25 Carbon Filters Prior To Use Open quick connect adapter. Step 28 Step 27 You must flush the ULTRA + 3 Plug in. pod filter until Outlet should it discharges always be clean water, to grounded.
- Page 12 Filter Filters can be ordered from our website at drinkpodusa.com, Indicator Amazon, Ebay, and other online retailers. & STATUS CYCLES The times below are for reference only. Data is based on 2.5 Gallons / 10 Liters usage per day. The actual lifespan of filters Lights varies based on local water quality, and usage.
- Page 13 Additional • Never place anything flammable • Never use chemical solvents like • Every Drinkpod comes with a gasoline to clean appliance. Only limited 12 month warranty from the next to the machine. MAINTENANCE clean with tap water and soft cloth.
- Page 14 10 minutes after they discharge clean water, to ensure any loose particulates are removed prior to using. Copyright © Drinkpod, LLC. All rights reserved. The Drinkpod brand and logo are trademarks of Drinkpod, LLC.
Need help?
Do you have a question about the 1000 Series and is the answer not in the manual?
Questions and answers