Safety Instructions - Lincat C6R/75U User And Installation Instructions Manual

SAFETY INSTRUCTIONS

WARNING!
Basic safety precautions, including the following, should be
followed to reduce the risk of personal injury and/or damage to
the cabinet. Make sure you have fully read these instructions
before installing and switching on. Keep this User Guide in a safe
place for future reference for you and your staff.
Do not clean the unit with a water jet.
REMOVAL OF PACKAGING
Remove any external packaging. If using a sharp instrument take
care to avoid contact with the product inside.
In the interest of hygiene, you should clean the product after
unpacking and ensure all plastic coatings are removed before use.
This unit is heavy. Be aware of the risks when lifting or
moving it. Always lift the cabinet using the base or lower frame, do
not lift with any other part. Do not pull the unit across your work
surface as it may make a mark.
The cabinet relies on the circulation of cold air, which must pass through
and around the shelves. Ensure circulation is not obstructed by food
product blocking the internal vents.
GENERAL
Do not try to modify this product.
Ensure that the electrical supply cable is not damaged.
If the supply cable is damaged, it should be replaced by Lincat Ltd or suitably
qualified persons, in order to avoid a hazard.
IS517 ECN4508 Page 4