Operating Instructions; Loading - Lincat C6R/75U User And Installation Instructions Manual

OPERATING INSTRUCTIONS

1. On/Off Switch
2. Light Switch
3. Temperature Control
The control panel layout may vary.
Ensure shelves are secure. Close the doors. To check operation of the unit,
connect it to the electricity supply, switch on the light (2) and the light will
illuminate, and then switch on the refrigeration using the On/Off switch (1), the
temperature controller will illuminate and the cabinet will begin to cool.
The temperature controller is factory set to maintain the temperature
inside at 3 to 5
cabinet and not the temperature of the food product.
The displayed temperature will fluctuate as the refrigeration system
cycles. At 2 hour intervals the system will automatically defrost. You will hear a
hissing sound for a few seconds and the display will indicate that it is in defrost
mode, refer to page 13.

LOADING

Load the cabinet with pre refrigerated products only, taking care to allow
room for the air to flow. Do not allow items to overhang the edges of the
shelves.
Do not obstruct any of the ventilation grilles.
IS517 ECN4508
3
o
C. The temperature displayed is the air inside the
Page 18
1
2