Description Of Controls - Smeg FS60XNG Instruction Manual

Instructions for the user

5. DESCRIPTION OF CONTROLS

5.1 Front control panel
All the cooker controls and commands are on the front panel.
If the cooker is equipped with an electronic programmer, before using the
oven make sure that the symbol
paragraph "6.1 Clock adjustment".
DESCRIPTION OF SYMBOLS
FRONT RIGHT BURNER
BACK RIGHT BURNER
BACK LEFT BURNER
FRONT LEFT BURNER
HOB BURNER COMMAND KNOB
The flame is lit by pressing the knob and turning it
anticlockwise to minimum flame
flame turn the knob between maximum (
minimum ( ). The burner goes out when the knob
is returned to the position
ELECTRIC OVEN THERMOSTAT KNOB
(CERTAIN MODELS ONLY)
Selection of cooking temperature is carried out by
turning the knob
temperature, between 50° and 260°C.
If the appliance has an electric oven, the warning
light will come on when the oven is heating up.
When it goes out it means that the required
temperature has been reached. Regular flashing
means that oven temperature is being constantly
maintained at the programmed level.
. To adjust the
.
clockwise to the
; appears on the display. See
ELECTRIC OVEN
THERMOSTAT
ELECTRIC OVEN
FUNCTION KNOB
GAS OVEN
THERMOSTAT
OVEN LIGHT /
ROTISSERIE / GRILL
SWITCH
) and
required
15