ACD GRUPPE M215SE Programming Instructions Manual page 63

Shutdown
Prompt a shutdown or suspend. Return value: 0
AutoOnReset of keyboard controller
Enables/deletes the AutoOnReset flag of TC which leads to an automatic reboot after a shutdown.
AutoOnDS of keyboard controller
Enables/deletes the AutoOnDS flag of TC, which leads to an automatic switch on after suspend as long as
the device is inserted in the docking station.
AutoWakeup of keyboard controller
Enables/deletes the AutoWakeup flag of TC, which leads to an automatic switch on after suspend as long as
the device is in suspend mode (suspend – immediate wakeup).
Starts/stops Bluetooth device [btdevicestart | btdevicestop]
Stops or starts the Bluetooth device. Forces reload of Bluetooth driver.
Activates/deactivates SDIO
Activates over power supply or resetting the module (not M300)
General information on CEToolBox
•
If no valid command was identified or errors occurred in the execution, the return value is 9.
•
It is possible to execute several commands in one single command line. The functions are then executed
in the command line parameter sequence.
Functions used to retrieve a return value for evaluation must/should be the last/only function parameter
of the CEToolbox
WinCEGeräteSE_Handbuch_Programmierung_v3.00_EN
[shutdown|suspend]
[setaonreset|delaonreset]
[setaonds|delaonds]
[setautowakeup|delautowakeup]
[sdioon | sdiooff]
63 / 65