ACD GRUPPE M215SE Programming Instructions Manual page 48

Copying the system files
The flash disk is then copied, please wait and follow the instructions that appear on the screen. The
device may perform a reboot.
Calibrate the touchscreen and press the Enter key to confirm
Skip the DC loader message
Disable the checkbox next to Update Lan, then tap Start
WinCEGeräteSE_Handbuch_Programmierung_v3.00_EN
M210SE:
Remove the µSD card and then tap the
screen.
M260SE:
Shutdown the device and remove the
battery.Then please pull off the µSD card.
Finally turn on the device.
48 / 65