Problems And Causes - Smeg CIR34XS Instructions For Use Manual

Instructions for the user
9
Each of the following cases is caused by an abnormal operation of the
appliance and should be dealt with by a authorised persons: please
contact your local dealer or Service Center in case you detect any of
these malfunctioning.
PROBLEM
The flame is very long with
bright yellow tips.
Black deposits
bottom of the pans.
The flame is very short and
noisy. The flame moves
away from the burner
ports.
The flame extinguishes
when the burner knob is
set to the low
position.
The valve knob is hard to
rotate.
24

PROBLEMS AND CAUSES

Defect of comburent air
or incorrect injectors.
on the Burner dirty or flame
ports obstructed.
Excess of comburent air.
Incorrect adjustment of
the minimum heat input
flame or excess of comburent
air.
Gas valve worn out or
needs lubrification.
CAUSE WHAT TO DO
Clean the burner.
Call Service Center if the
problem remains.
Call Service Center.
Call Service Center.
Call Service Center.