Smeg CIR900X User Manual
  1. Manuals
  2. Brands
  3. Smeg Manuals
  4. Hob
  5. CIR900X
  6. User manual
Smeg CIR900X User Manual

Smeg CIR900X User Manual

Smeg hob user manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1. PRECAUTIONS FOR USE.................................................. 4
POLICY ............................................................................... 5
3. SAFETY PRECAUTIONS.................................................... 6
4. GETTING TO KNOW YOUR APPLIANCE .......................... 7
5. BEFORE INSTALLATION ................................................... 7
6. USING THE HOB ................................................................ 8
7. CLEANING AND MAINTENANCE .................................... 10
8. INSTALLING THE APPLIANCE ........................................ 11
9. GAS CONNECTION .......................................................... 15
INSTRUCTIONS FOR THE USER: these provide recommendations for
use, a description of the controls and the correct procedures for cleaning
and maintaining the appliance
INSTRUCTIONS FOR THE INSTALLER: these are intended for the
qualified engineer who is to install, commission and test the appliance

Table of Contents

3

Advertisement

Table of Contents
loading

Related Manuals for Smeg CIR900X

Summary of Contents for Smeg CIR900X

  • Page 1: Table Of Contents

    1. PRECAUTIONS FOR USE... 4 2. DISPOSAL INSTRUCTIONS - OUR ENVIRONMENT POLICY ... 5 3. SAFETY PRECAUTIONS... 6 4. GETTING TO KNOW YOUR APPLIANCE ... 7 5. BEFORE INSTALLATION ... 7 6. USING THE HOB ... 8 7. CLEANING AND MAINTENANCE ... 10 8.

  • Page 2: Precautions For Use

    Precautions for Use 1. PRECAUTIONS FOR USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. TAKE GOOD CARE OF IT AND KEEP IT TO HAND THROUGHOUT THE HOB'S LIFE CYCLE. WE URGE YOU TO READ THIS MANUAL AND ALL THE INFORMATION IT CONTAINS CAREFULLY BEFORE USING THE APPLIANCE.

  • Page 3: Disposal Instructions - Our Environment Policy

    Disposal instructions 2. DISPOSAL INSTRUCTIONS ENVIRONMENT POLICY Our products are only packaged using non-pollutant, environment-friendly, recyclable materials. We urge you to cooperate by disposing of the packaging properly. Contact your local dealer or the competent local organisations for the addresses of collection, recycling and disposal facilities.

  • Page 4: Safety Precautions

    Safety Precautions 3. SAFETY PRECAUTIONS SEE INSTALLATION INSTRUCTIONS FOR SAFETY REGULATIONS FOR ELECTRIC OR GAS APPLIANCES AND FOR VENTILATION FUNCTIONS. IN YOUR INTEREST AND TO ENSURE YOUR SAFETY, BY LAW ALL ELECTRIC APPLIANCES MUST ONLY BE INSTALLED AND SERVICED BY QUALIFIED STAFF, IN ACCORDANCE WITH THE RELEVANT REGULATIONS.

  • Page 5: Getting To Know Your Appliance

    Instructions for the User 4. GETTING TO KNOW YOUR APPLIANCE Auxiliary Burner (AUX) Semi-rapid (SR) burner Rapid Burner (R) Ultrarapid Burner (UR3) 5. BEFORE INSTALLATION Never leave packaging residues unattended in the home. Separate waste packaging materials by type and consign them to the nearest separate disposal centre.

  • Page 6: Using The Hob

    Instructions for the User 6. USING THE HOB Gas hob Before lighting the hob burners check that the flame diffuser rings are correctly in place with their respective burner caps, making sure that the holes A in the flame diffusers are aligned with the plugs and thermocouples.
  • Page 7 Instructions for the User Practical hints for using the burners For better burner efficiency and to minimise gas consumption, use pans with flat, even bottoms with lid and of suitable size for the burner, so that flames do not reach up the sides of the pan (see point "6.3 Pan diameters").

  • Page 8: Cleaning And Maintenance

    Instructions for the User 7. CLEANING AND MAINTENANCE NEVER USE A JET OF STEAM FOR CLEANING THE APPLIANCE. Before carrying out any operations, disconnect the appliance from the electricity supply. Cleaning stainless steel To keep stainless steel in good condition, it must be cleaned regularly, after each use of the appliance, first allowing it to cool.

  • Page 9: Installing The Appliance

    Instructions for the Installer 8. INSTALLING THE APPLIANCE Fitting the appliance in the top This appliance is in class 3. The procedures required below must be carried out by a skilled builder and/or joiner. The hob can be installed on various materials, including masonry, metal, solid wood and wood finished with plastic laminates, provided the material is heat-resistant (T 90°...
  • Page 10 Instructions for the Installer The entire surface of the cut (fig. 2). Now place the 7 brackets supplied to secure the top to the supporting structure. The figures below show how to use these brackets. The L shaped square as per B in fig. 2 must be fixed to the sides of the work top.

  • Page 11: Clearance Above And Around Domestic Appliances

    Instructions for the Installer Clearance above and around domestic appliances Extract from AS5601 REQUIREMENTS 1 Overhead clearances – (Measurement A) Range hoods and exhaust fans shall be installed in accordance with the manufacturer’s instructions. However, in no case shall the clearance between the highest part of the hob of the cooking appliance and a range hood be less than 600 mm or, for an overhead exhaust fan, 750 mm.
  • Page 12 Instructions for the Installer 3 Additional requirements for Freestanding and Elevated Cooking Appliaces – (Measurements D & E) Where D, the distance from the periphery of the nearest burner to a horizontal combustible surface is less than 200 mm, then E shall be 10 mm or more, or the horizontal surface shall be above the trivet.

  • Page 13: Gas Connection

    Instructions for the Installer 9. GAS CONNECTION This appliance is suitable for installation with Natural Gas or ULPG (propane). Refer to page 12 for the relevant burner pressure and appropriate injector sizes. When the appliance is to be connected to Natural Gas then the pressure regulator supplied must be fitted to the gas inlet.
  • Page 14 Instructions for the Installer Electrical connection Check that the power supply voltage and size are as specified on the nameplate below the appliance carter. The nameplate must never be removed. The appliance must be connected to earth in compliance with electrical system safety regulations.

  • Page 15: Adapting To Different Types Of Gas

    Instructions for the Installer 10. ADAPTING TO DIFFERENT TYPES OF GAS Before carrying out the operations described below, disconnect the appliance from the electricity supply. The appliance is tested with natural gas NG (2H) at the pressure of 1.0 kPa. If it is to be used with other types of gas, the burner nozzles have to be changed and the gas taps adjusted to set the minimum flame.
  • Page 16 Instructions for the Installer 10.2 Burner and nozzle characteristics table Burner Auxiliary (1) Semi-rapid (2) Rapid (3) Ultra-rapid (4) Burner Auxiliary (1) Semi-rapid (2) Rapid (3) Ultra-rapid (4) To identify the burners on your hob, refer to the drawings in point "4. GETTING TO KNOW YOUR APPLIANCE".

  • Page 17: Final Operations For Gas Appliances

    Instructions for the Installer 11. FINAL OPERATIONS FOR GAS APPLIANCES After making the adjustments described above, reassemble the appliance, reversing the procedures described in point "10.1 Changing the hob nozzles". After adjusting for use of a gas other than the gas used for testing the appliance, replace the gas setting label inside the warming compartment with the label for the new gas.
  • Page 20 914772987/ B...

This manual is also suitable for:

Snl900xgf

Table of Contents