Figure 3-44 Lacp Port Configuration - SMC Networks TigerSwitch Management Manual

24-port 10/100mbps stackable managed switch

Hide thumbs Also See for TigerSwitch:

Table of Contents

ONFIGURATION

Web – Click Port, LACP, Aggregation Port. Set the System Priority, Admin

Key, and Port Priority for the Port Actor. You can optionally configure

these settings for the Port Partner. (Be aware that these settings only affect

the administrative state of the partner, and will not take effect until the

next time an aggregate link is formed with this device.) After you have

completed setting the port LACP parameters, click Apply.

Figure 3-44 LACP Port Configuration

Table of Contents

Do you have a question about the TigerSwitch and is the answer not in the manual?

Tigerswitch smc6224m