Connecting Directly To The Drobo 8D - Drobo 8D User Manual

1.2.3.1

Connecting Directly to the Drobo 8D

You can connect the Drobo 8D directly to your Apple Mac™ using the Thunderbolt 3 port.
If you are using a Thunderbolt port and would like to connect the Drobo 8D in a daisy-chain, see
Connecting the Drobo 8D in a
As you follow the steps below, refer to the following image.
1. Plug one end of the Thunderbolt cable into the back of the Drobo 8D.
2. Plug the other end of the cable into your host Apple Mac™.
3. Connect the power cord to the power connection at the back of the Drobo device.
4. Connect the other end of the power cord to a power source.
5. You are now ready to turn on the Drobo device and format the drives.
Note:
We recommend connecting a surge protector to protect against power surges. For more
information, see
Next in the Setup for the Drobo 8D
Power On the Drobo 8D
Return to Setting Up the Drobo 8D
Drobo 8D User Guide
Daisy-chain.
Using Power Protection.
24