Drobo 8D User Manual page 121

Power Light
Activity Light
Capacity Gauge
SSD Light/Status
Indicator
Drobo 8D User Guide
Blinking Yellow and Green: Do not remove these drives or power
down. The Drobo device is working to protect your data.
Solid Red: Add a drive or replace the current drive with a larger drive
immediately. The Drobo device is critically low on space. See
Drives
Blinking Red: Replace this drive immediately. This drive has failed.
See
Adding Drives
Green: The power is on and the Drobo device is ready.
Yellow: The Drobo device is in the process of powering on.
Red: Tour Drobo device has overheated.
8D, disconnect the data cable and then the po
and then restart.
Blinking Green: Data is actively being transferred between your Apple
Mac™ and the Drobo device. Do not remove or add drives during this
process.
Blue: Displays the percentage of the Drobo device that is full, in 10%
increments. There are 10 capacity gauge lights. So, for example, if the
Drobo device is 30% full, three blue lights display.
Green: No action is required, SSD is healthy.
Red: Disk failure
Safely power down the Drobo
wer cable. Let it cool down
Adding
121