Denon PRIME 4 Quick Start Manual page 9

10. Stereo/Mono: Use this switch to set the channel configuration of the Master Outputs: Stereo (binaural audio
using separate left and right channels) or Mono (summed monaural audio through both left and right channels).
11. Line Inputs (RCA, unbalanced): Use standard RCA cables to connect these line-level inputs to an external
audio source.
12. Line/Phono Inputs (RCA, unbalanced): Use standard RCA cables to connect these line-level or phono-level
inputs to an external audio source.
13. Phono/Line Switch: Flip this switch to the appropriate position, depending on the device connected to the
Line/Phono Inputs. If you are using phono-level turntables, set this switch to Phono to provide the additional
amplification needed for phono-level signals. If using a line-level device, such as a CD player or sampler, set this
switch to Line.
14. Grounding Terminal: If using phono-level turntables with a grounding wire, connect the grounding wire to these
terminals. If you experience a low "hum" or "buzz", this could mean that your turntables are not grounded.
Note: Some turntables have a grounding wire built into the RCA connection and, therefore, nothing needs to be
connected to the grounding terminal.
15. Mic Inputs (XLR or 1/4" / 6.35 mm): Use standard XLR or 1/4" (6.35 mm) cables (not included) to connect
standard dynamic microphones to these inputs. Use the Mic 1 and Mic 2 Level knobs on the top panel to
control the volume level.
®
16. Kensington Lock Slot: Use this slot to secure Prime 4 to a table or other surface.
Important: Visit denondj.com and find the webpage for Prime 4 to download the complete User Guide.
9