Omron 3G3MX2 Series Connection Manual page 24

Hide thumbs Also See for 3G3MX2 Series:

Table of Contents

7.3.3.

Transferring Project Data

Transfer the project data from the Sysmac Studio to the Controller.

Select Online from the

Controller Menu.

When an online connection is

established, a yellow bar is

displayed on the top of the Edit

Pane.

Select Synchronization from

the Controller Menu.

The Synchronization Dialog Box

is displayed.

Check that the data to transfer

(NJ501 in the right figure) is

selected. Then, click the

Transfer to Controller Button.

7. Connection Procedure

Table of Contents

Show Quick Links

Table of Contents