Omron 3G3MX2 Series Connection Manual page 17

4
Use the procedure on the right
to set the parameter.
[C102] Reset selection: 03.
*Set "03" (Trip reset only).
5
Cycle the power supply to the
Inverter.
b037
Press the
c001
C001 parameter is displayed.
Press the
move to C102.
c102
Press the
00
The initial data is displayed.
Press the
times.
03
Change the data to "03".
Press the
c102
The parameter is displayed again.
7. Connection Procedure
The parameter is displayed.
Mode Key once.
Increment Key to
C102 parameter is displayed.
Enter Key.
Increment Key three
Enter Key.
15