Options - Zanussi ZDF3023X User Manual

1) Degree of soil
Programme
All
4)
Fresh soil
Crockery and cut-
5)
lery
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the programme duration and the consumption values.
2) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the
temperature and quantity of the water, the energy consumption and the programme duration.
3) This is the standard programme for test institutes. With this programme you have the most efficient use of
water and energy consumption for crockery and cutlery with normal soil.
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and
bad odours to come out from the appliance.
Do not use detergent with this programme.
5) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

Options

Multitab option
Activate this option only when you use the
combi detergent tablets.
This option deactivates the flow of rinse aid and
salt. The related indicators are off.
The programme duration can increase.
Activating the Multitab option
Activate or deactivate the Multitab option
before the start of a programme. You can-
not activate or deactivate this option while a
programme operates.
1. Press the on/off button to activate the appli-
ance. Make sure that the appliance is in set-
ting mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
2. Press Multitab, the Multitab indicator
comes on.
18
Type of load
Prewash
Wash 65 °C
Rinse
Programme
phases
12
30
The option stays on until you deactivate it.
Press Multitab, the Multitab indicator
goes off.
If you stop to use the combi detergent
tablets, before you start to use separately
detergent, rinse aid and dishwasher salt,
do these steps:
1. Deactivate the Multitab option.
2. Set the water softener to the highest level.
3. Make sure that the salt container and the
rinse aid dispenser are full.
4. Start the shortest programme with a rinsing
phase, without detergent and without
dishes.
5. Adjust the water softener to the water hard-
ness in your area.
6. Adjust the released quantity of rinse aid.
Duration Energy
(min) (kWh)
0.1
0.9
www.zanussi.com
Water
(l)
4
9