Care And Cleaning - Zanussi ZDF3023X User Manual

• When the countdown is completed, the pro-
gramme starts.
– The indicator of the phase in operation
comes on.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance contin-
ues from the point of interruption.
Cancelling the delay start while the
countdown operates
Press Delay again and again until the display
shows the programme duration and the phase
indicators of the set programme come on. The
programme starts.
Cancelling the programme
Press and hold Start until the programme du-
ration flashes in the display and the phase indi-
cators of the set programme come on.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
At the end of the programme
When the programme is completed, the display
shows 0 and the phase indicators go off.

Care and cleaning

Warning! Before maintenance, deactivate
the appliance and disconnect the mains
plug from the mains socket.
Dirty filters and clogged spray arms de-
crease the washing results.
Make a check regularly and, if necessary, clean
them.
www.zanussi.com
1. Deactivate the appliance. Turn the pro-
gramme knob until the programme marker is
aligned with the off position.
2. Close the water tap.
• If you do not deactivate the appliance,
after three minutes from the end of the
programme:
– All the indicators go off.
– The display shows one horizontal sta-
tus bar.
This helps to decrease the energy con-
sumption.
Press one of the buttons, the display and
the indicators come on again.
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
Cleaning the filters
1
C
B
A
2
23