Options - Zanussi ZDT 16011 FA User Manual

Programme Degree of soil
1) Type of load
Heavy soil
Crockery, cutlery,
pots and pans
Fresh soil
Crockery and cut-
3)
lery
4) Normal soil
Crockery and cut-
lery
Normal or light soil
Delicate crockery
and glassware
1) The pressure and the temperature of the water , the variations of the mains supply, the options and the
quantity of dishes can change the programme duration and the consumption values.
2) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the
temperature and quantity of the water, the energy consumption and the programme duration.
3) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
4) With this programme you have the most efficient use of water and energy consumption for crockery and
cutlery with normal soil. (This is the standard programme for test institutes).
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

Options

Multitab option
Activate this option only when you use the
combi detergent tablets.
This option deactivates the flow of rinse aid and
salt. The related indicators are off.
The programme duration can increase.
Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the flow of rinse aid and
salt. The related indicators are off.
The programme duration can increase.
1. Press the on/off button to activate the appli-
ance. Make sure that the appliance is in set-
ting mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
18
Programme
phases
Prewash
Wash 70 °C
Rinses
Dry
Wash 60 °C
Rinse
Prewash
Wash 50 °C
Rinses
Dry
Wash 45 °C
Rinses
Dry
2. Press and hold function buttons (D) and (E)
at the same time until the multitab indicator
comes on.
The option stays on until you deactivate it.
• Press and hold function buttons (D) and (E)
at the same time until the multitab indicator
goes off.
If you stop to use the combi detergent
tablets, before you start to use separately
detergent, rinse aid and dishwasher salt,
do these steps:
1. Deactivate the multitab option.
2. Set the water softener to the highest level.
3. Make sure that the salt container and the
rinse aid dispenser are full.
Duration Energy
(min) (kWh)
130 - 150 1.4 - 1.6
30 0.9
150 - 160 1.0 - 1.1
70 - 80 0.8 - 0.9
www.zanussi.com
Water
(l)
15 - 16
9
10 - 11
12 - 13