Table of Contents
Advertisement
Introduction
Before You Begin
About the i-Sense Voltage Monitor
The i-Sense voltage monitor captures and records voltage disturbances on the
electric power service, and long-term voltage trends. Voltage disturbances are the
most common power quality (PQ) problems and include voltage sags (dips),
swells, or interruptions and outages. Many different mains voltages are used
internationally and the monitor can be easily configured to operate with most of
them.
The monitor is a part of the i-Grid voltage network that enables the service to
report and alert. Operation of the monitor requires daily communication with
the i-Grid® servers via the internet. Instructions for setting up an Internet
connection are included in this manual.
TIP The latest support information is available at www.igrid.com.
Before you begin installation of your i-Sense® voltage monitor, complete these
steps.
1. Inspect the monitor for shipping damage. If any damage is seen, contact
the shipper.
2. Record the Serial Number:
___________ - ___________ - ___________
The S/N label is on the bottom of the unit and required for registration.
3. Register the monitor:
– Go to www.igrid.com.
– Log in, or follow the online instructions to register as an i-Grid user.
– Follow the online instructions to register your new monitor.
The monitor subscription is included with purchase. Future renewals are
required to continue accessing data.
Rockwell Automation Publication 1608S-UM001C-EN-P - November 2018
1
Chapter
7
Advertisement
Table of Contents
