Table of Contents
Advertisement
Chapter 2
Configuration
12
If the personal computer was already set to "Use the following IP address:" then
those settings should be recorded for later restoration.
The i-Sense Management Console
Connect to the monitor by typing http://192.168.1.200 (replace with the actual
IP address) into the web browser address bar. The i-Sense management console
will prompt for a valid username and password. The factory-default user
credentials are:
Username: admin
Password: password
Change the username and password from the default values during initial setup.
Click on the "Security" menu item to change the default values.
If the username or password is lost or the monitor is not able to communicate
with the i-Grid website, you will need to reset the user credentials and
networking options back to their default values using the push-buttons.
See
Management: Reset to Factory Defaults on page 13
Rockwell Automation Publication 1608S-UM001C-EN-P - November 2018
for more details.
Advertisement
Table of Contents
