Promax GV-798+ Instruction Manual page 75

[D] CLOCK
When the CLK ON field is activated, the image of a clock is seen in the bottom
showing the hour, minute and second. This disappears when CLK OFF is
deactivated.
In order to set the hour you must select the CLK field and later to press the rotary
selector [6] until generator emits an acoustic signal, automatically the clock
setting will be shown according to the format: HH:MM:SS. At this situation,
turning the rotary selector [6], it is possible to modify both digits corresponding to
hours; in order to modify the minute's field and the one of seconds, the rotary
selector must be pressed [6]. After updating all fields and to activate the final
clock updating you must press the rotary selector [6] afresh until hearing an
acoustic confirmation signal.
[E] INTERLACING
Activation, IL ON, or deactivation, IL OFF, of the interlacing.
PARAMETERS REGARDING PDC AND VPS SIGNALS
VPS (Video Program Service) and PDC (Program Delivery Control) are
information signals, which are emitted by television channels during a program, that
may activate or stop the users' video recorders if they are equipped with this feature.
[F] PDC SIGNAL, PROGRAMME DELIVERY CONTROL
Activation, PDC ON, or deactivation, PDC OFF, of the Programme Delivery
Control signal.
[G] VPS SIGNAL, VIDEO PROGRAMME SYSTEM
Activation, VPS ON, or deactivation, VPS OFF, of the VPS signal.
[H] TIMING
Selection of minutes between 1 min. or 5 min. Information on month (1), day (1)
and time (1) is fixed.
[I] TRANSMIT SIGNAL
Selection of the transmit signal between START, STOP or PAUSE.
[J] COUNTRY
Selection of the country between SPAIN, ENGLAND, FRANCE or GERMANY.
[K] FORMAT
This field allows selecting the different formats the WSS.
[L] WIDE SCREEN SIGNALLING
Activation, WSS ON, or deactivation, WSS OFF, of Wide Screen Signalling. This
signal acts on 16:9 format equipment which has a circuit detector for this signal.
Page 28
Colour pattern generator GV-798+
06/2016