Safety Rules; Generals - Promax GV-798+ Instruction Manual

Colour pattern generator GV-798+

2 SAFETY RULES

2.1 Generals

* Use this equipment connected only to devices or systems with their common
at ground potential or insulated from the mains.
* This is a class I equipment, for safety reasons plug it to a supply line with the
corresponding ground terminal.
* This equipment can be used in Over-Voltage Category II installations and
Pollution Degree 1 environments.
* When using some of the following accessories use only the specified ones to
ensure safety:
Power cord
* Observe all specified ratings both of supply and measurement.
* Remember that voltages higher than 60V DC or 30V AC rms are dangerous.
* Use this instrument under the specified environmental conditions.
* The user is only authorized to carry out the following maintenance operations:
Replace the mains fuse of the specified type and value.
On the Maintenance paragraph the proper instructions are given.
Any other change on the equipment should be carried out by qualified personnel.
* The negative of measurement is at ground potential.
* Do not obstruct the ventilation system.
* Use for the signal inputs/outputs, specially when working with high levels,
appropiate low radiation cables.
* Follow the cleaning instructions described in the Maintenance paragraph.
06/2016 Page 15