Device Elements; Start Up - Kärcher NT 30/1 Tact Instructions Manual

Device elements

1 Electrodes
2 Suction support
3 Suction hose
4 Hose hook
5 Push handle lock (NT 50/1 only)
6 Crevice nozzle
7 Air outlet, working air
8 Suction head
9 Suction head lock
10 Recessed grip
11 Dirt receptacle
12 Steering roller
13 Handle
14 Air inlet, motor cooling air
15 Floor nozzle
16 Suction tube
17 Stop for tool box
18 Rubber sleeve, screwable
19 Fixing eyelet
20 Filter cover
21 Carrying handle
22 Suction force regulator (continuous)
23 Tool adapter (Tact Te only)
24 Push handle (NT 50/1 only)
25 Rotary switch for suction output (min-
max) (Tact Te only)
26 Rotating knob
27 Socket (Tact Te only)
28 Floor nozzle holder
29 Drain hose (NT 50/1 only)
30 Holder for suction pipe
31 Cable hook (NT 50/1 only)
32 Bender
33 Power cord
34 Bender holder (NT 30/1, NT 40/1 only)
35 Filter frame
36 Flat fold filter (PES)
37 Filter dedusting
38 Nameplate
ATTENTION
The flat pleated filter must always be in
place while vacuuming.
10

Start up

Anti-static system
Static charge is deflected by providing
earthing to the connection nozzles. This
prevents the formation of sparks and cur-
rent shocks due to attachments (option)
with electrical conductivity.
Dry vacuum cleaning
– When vacuuming fine dust, a fleece fil-
ter or dust bag can also be used.
Install fleece filter bag
Illustration
 Release and remove the suction head.
 Insert the fleece filter bag.
 Insert and lock the suction head.
Installing the dust disposal bag
Illustration
 Release and remove the suction head.
 Insert the disposal bag.
 Pull disposal bag over the container.
Make sure that the marking line is situ-
ated within the container and both ven-
tilation holes are positioned at the back
of the container.
 Insert and lock the suction head.
Wet vacuum cleaning
Inserting the rubber lips
Illustration
 Remove the brush strips.
 Install the rubber lips.
Remove the fleece filter bag
Illustration
 Release and remove the suction head.
 Pull out the fleece filter bag on the
flange towards the top.
 Tightly close the fleece filter bag with
lock cap.
 Insert and lock the suction head.
– To suck wet dirt, first remove the fleece
filter bag.
– 2
EN