Table of Contents
Advertisement
Safety Compliance
Underwriters Laboratories Compliance Statement
Important! Before making connections, make sure you have the
correct cord set. Check it (read the label on the cable) against the
following:
Operating Voltage
120 Volts
240 Volts
(Europe only)
The unit automatically matches the connected input voltage.
Therefore, no additional adjustments are necessary when
connecting it to any input voltage within the range marked
on the rear panel.
Cord Set Specifications
UL Listed/CSA Certified Cord Set
Minimum 18 AWG
Type SVT or SJT three conductor cord
Maximum length of 15 feet
Parallel blade, grounding type attachment plug
rated 15 A, 125 V
Cord Set with H05VV-F cord having three conductors
with minimum diameter of 0.75 mm
IEC-320 receptacle
Male plug rated 10 A, 250 V
Compliances
2
ix
Advertisement
Table of Contents
