SMC Networks SMC Barricade g SMC2804WBR User Manual page 15

• One RJ-45 port for connection to a DSL or cable modem
(WAN). This port also auto-negotiates operating speed to
10/100 Mbps, the mode to half/full duplex, and the pin signals
to MDI/MDI-X.
The following figures show the components of the Router:
Figure 1. Front and Rear Panels
Item Description
LEDs PWR, SPD, Link/ACT, WLAN and LAN port status indicators.
(See "LED Indicators" on page 1.)
LAN Use this port to connect to your PC.
Ports
UBS Use this port to connect to your printer.
Port
Reset Use this button to reboot the router or restore the default factory
Button settings.
Power Connect the included power adapter to this inlet.
Inlet
Warning: Using the wrong type of power adapter may damage
your router.
WAN Connect your ethernet cable, or xDSL modem to this port.
Port
Hardware Description
5