Table of Contents
Advertisement
given but <index> is left out, <oper> is put in the next free location. If only
<format> is given, the format of the
<oper> in the read command is changed. The Access Technology selection
parameters, <GSM_AcT>,
<GSM_Compact_AcT> and <UTRAN_AcT>, are required when writing User
controlled PLMN selector with Access
Technology, EF EFPLMNwAcT, Operator controlled PLMN selector with Access
Technology EFOPLMNwAcT and HPLMN
selector with Access Technology EFHPLMNwAcT, see TS 31.102. Refer
subclause 9.2 for possible <err> values.
Command
+CPOL=[<index>][,
<format>[,<oper>[,<GS
M_AcT>,<GSM_Compact_A
cT>,<UTRAN_AcT>]]]
+CPOL?
+CPOL=?
Defined values
<indexn>: integer type; the order number of operator in the SIM/USIM preferred
operator list
<format>:
0 long format alphanumeric <oper>
1 short format alphanumeric <oper>
2 numeric <oper>
<opern>: string type; <format> indicates if the format is alphanumeric or numeric
(see +COPS)
<GSM_AcTn>: GSM access technology:
0 access technology not selected
1 access technology selected
<GSM_Compact_AcTn>: GSM compact access technology:
0 access technology not selected
1 access technology selected
+CME ERROR: <err>
+CPOL:
<index1>,<format>,<oper1>[,<GSM_AcT1
>,<GSM_Com
pact_AcT1>,<UTRAN_AcT1>]
[<CR><LF>+CPOL:
<index2>,<format>,<oper2>[,<GSM_AcT2
>,<GSM_Com
pact_AcT2>,<UTRAN_AcT2>]
[...]]
+CME ERROR: <err>
+CPOL: (list of supported <index>s),(list of
supported
<format>s)
+CME ERROR: <err>
40
WCDMA Module
Advertisement
Table of Contents
