Gcap Capabilities List +Gcap; Cmee Repor Mobile Equipment Errors; Zhwv Request Hardware Revision Identification - Zte AD3812 Command Manual

2.8 +GCAP Capabilities List +GCAP

Description This command gets the complete list of capabilities.
Command AT+GCAP
+ CGREG =?
Defined values

2.9 +CMEE Repor Mobile Equipment Errors

Description This command disables or enables the use of the "+CME ERROR : <xxx>" or
"+CMS
ERROR :<xxx>" result code instead of simply "ERROR". See chapter 20 (MS
Error Result
Codes) for +CME ERROR result codes description and chapter 20 (Message
Service Failure
Result Codesfor +CMS ERROR result codes.
Command + CMEE =[<n>]
+ CGREG =?
+ CGREG?
Defined values 0 Disable MS error reports, use only « ERROR »
1 Disable MS error reports, use only « ERROR »

2.10 +ZHWV Request hardware revision identification

Description Execution command causes the TA to return hardware revision identification
Command + ZHWV
+ ZHWV=?
Defined values
+GCAP: +CGSM, +CIS707-A, +MS, +ES,
+DS, +FCLASS
OK
+CGREG: (list of supported <n>s)
OK
CMEE: (0,1,2)
+CMEE: 2
OK
<revision>
+ ZHWV: <err>
10
WCDMA Module