Network Service Related Commands; Cnum Subscriber Number; Cregnetwork Registration - Zte AD3812 Command Manual

4 Network service related commands

4.1 +CNUM Subscriber number

Description This command allows the transmission of DTMF tones and arbitrary tones (see
note). These tones may be used (for
example) when announcing the start of a recording period. The command is
write only. In this profile of commands,
this command does not operate in data or fax modes of operation
(+FCLASS=0,1,2-7).
Command +VTS=as
+VTS=?
Defined values 1. <DTMF>. A single ASCII character in the set 0-9, #,*,A-D. This is interpreted
as a single ACSII character whose
duration is set by the +VTD command.
NOTE 2: In GSM this operates only in voice mode.
2. [<tone1>,<tone2>,<duration>]. This is interpreted as a dual tone of
frequencies <tone1> and <tone2>,
lasting for a time <duration> (in 10 ms multiples).
NOTE 3: This does not operate in GSM.
3. {<DTMF>,<duration>}. This is interpreted as a DTMF tone of different duration
from that mandated by the
+VTD command.

4.2 +CREGNetwork registration

Description This command allows the transmission of DTMF tones and arbitrary tones (see
note). These tones may be used (for
example) when announcing the start of a recording period. The command is
write only. In this profile of commands,
this command does not operate in data or fax modes of operation
(+FCLASS=0,1,2-7).
Command +VTS=as
+VTS=?
Defined values 1. <DTMF>. A single ASCII character in the set 0-9, #,*,A-D. This is interpreted
as a single ACSII character whose
duration is set by the +VTD command.
NOTE 2: In GSM this operates only in voice mode.
2. [<tone1>,<tone2>,<duration>]. This is interpreted as a dual tone of
frequencies <tone1> and <tone2>,
lasting for a time <duration> (in 10 ms multiples).
NOTE 3: This does not operate in GSM.
3. {<DTMF>,<duration>}. This is interpreted as a DTMF tone of different
above
(list
above
(list
31
WCDMA Module