Hardware Installation - SMC Networks SMC EZ Connect SMC2632W User Manual

H
ARDWARE
Warning: Network cards are sensitive to static electricity. To
protect the card, always touch the metal chassis of your
computer before handling the card.
1. Turn on your computer and boot your operating system.
2. Find an available Type II or Type III PCMCIA slot in your
computer.
3. With the PC Card's 68-pin connector facing the PCMCIA slot
and the "EZ Connect Wireless PC Card" label facing up, slide
the card completely into the PCMCIA slot as shown below.
Note: The PCMCIA slot allows you to "hot swap" PC Cards any
time, even when the power of your computer is on.
H
ARDWARE
I
NSTALLATION
I
NSTALLATION
7