Network Connection Problems - SMC Networks SMC EZ Connect SMC2632W User Manual

• Check for a defective computer or PCMCIA connection by
trying the adapter in another computer that is known to operate
correctly.
• If it still does not work, take out the wireless adapter. Delete
CW10.sys from c:\windows\system. Then go to "Control
Panel" and delete the adapter from your network configuration
menu. Restart your PC and reinstall the card.

Network Connection Problems

If the Link LED on the PC Card does not light, or if you cannot
access any network resources from the computer, check the
following:
• Make sure the correct software driver is installed for your
operating system. If necessary, try reinstalling the driver.
• Make sure the computer and other network devices are
receiving power.
• The access point you want to attach to may be defective. Try
using another access point.
• If you cannot access a Windows or NetWare service on the
network, check that you have enabled and configured the
service correctly. If you cannot connect to a particular server,
be sure that you have access rights and a valid ID and
password.
• If you cannot access the Internet, be sure you have configured
your system for TCP/IP.
N C
ETWORK ONNECTION
P
ROBLEMS
37