Hardware Installation - SMC Networks 2531W-B Quick Installation Manual

Hardware Installation

Warning: Network cards are sensitive to static electricity.
To protect the card, avoid touching its electrical
components and always touch the metal chassis
of your computer before handling the card.
Step 1. Turn on your computer and insert the EZ Installation
Wizard and Documentation CD. Run the utility software and
then shut down your machine when complete.
Step 2. Find an available Type II or Type III PCMCIA slot
in your computer.
7
Step 3. With the PC Card's 68-pin connector facing the PCMCIA
slot and the "EliteConnect TM Wireless PC Card" label facing up,
slide the card completely into the PCMCIA slot as shown below.
Step 4. For Windows 98SE/Me/2000, PCMCIA card and socket
services compliant with revision 2.10 of the PCMCIA specification
are required. Please check the documents of your PCMCIA driver
for confirmation.
Step 5. The card will be automatically installed during
the Operating System's boot-up process. Once complete,
you may take advantage of the wireless functionality
this adapter has to offer.
Note: The PCMCIA slot allows you to hot swap PC Cards any time,
even when your computer is on.
8