SMC Networks SMC EZ Connect SMC2632W User Manual page 37

Manual Entry – "Manual Entry" allows you to manually enter key
elements (two hexadecimal digits in each block.)
Default Key ID – Choose the Key ID that has the encryption
string you prefer. If you are using a key generated from the
passphrase, you must use the same passphrase and key on each
station.
To use the WEP function, take the following steps:
1. Select "128-bit" or "64-bit" in the "Encryption" field.
2. Choose "Create with Passphrase," type a string in the
Passphrase field, and click "Generate."
3. Select the key, and click "Apply."
Note: A passphrase string can consist of up to 32
alphanumeric characters.
Or
1. Check "Manual Entry" and enter hexadecimal numbers into
Q -L
UICK AUNCH
I
CON
25