Setting Up Your Polysher - Polymaker Polysher Operation Manual

SETTING UP YOUR POLYSHER

1
Attach the Power Cable
Ensure to place the Polysher
and flat surface. The power supply unit
comes with several different plugs. Please
choose the one suited to your country/region.
Attach the power cable to the power port,
which is on the lower back of the Polysher
2
Power On the Polysher
Connect the power supply to mains power.
Press the On/Off button on the front panel of
the Polysher . A greeting tone should sound,
TM
the timer display should flash briefly, and the
blue ring around the On/Off button should
illuminate.
3
Open the Polysher
Press the Open/Close button. The lift
mechanism should rise to its fully-open
position and stop.
4
Open the Transparent Casing
Lift up the transparent casing and hook it on
the fan brim as shown on the picture.
5
Install the Nebulizer
Install a Nebulizer by firmly pressing it down
into the socket. Make sure the connection is
satisfactory.
on a stable
TM
TM
TM
TM
.
TM
10