Electrical; Field Wiring (At Install) - Heat & Glo FDN-5-PIER Installation And Operating Manual

A. FIELD WIRING (AT INSTALL) See Terminal Details Pages 27-31
Figure 9A
*Cap shown is from the PVK Series
Heat & Glo • FDN-4-PIER, FDN-5-PIER, FDN-6-PIER, FDN-7-PIER Installation Manual • 16400-9803 • 2/19
26

9 - ELECTRICAL

ENERVEX POWERVENT SYSTEMS
CAP VAC AMP
PVK-45 120
PVK-67 120
PVI-45 120
PVI-67 120
Insulation Pad
(Must be cut in center to accomodate
vent size.)
Optional Mechanical Damper
Not included with appliance from factory
To light the fireplace: Activate the switch.
The fireplace has a pre and post timer, set at the factory for 30 seconds.
The powervent and flame will not turn on for 30-60 seconds after switch is
activated and the powervent will run for 30 seconds after it has been shut off.
HP
3.2 1/10
3.4 1/7
4.9 1/4
7.8 1/2
JUNCTION BOX WITH CAPACITOR
RED
BLACK
WHITE
WHITE
Junction Box With Capacitor
FACTORY CONNECTED
FACTORY CONNECTED
TO FAN
GREEN
BLACK
BLACK
BLACK