Table of Contents
Advertisement
2. Mount the Transceiver unit
To install the cellular telephone with the transceiver unit located in the trunk-space of the
automobile follow the steps outlined below.
a. Place the mounting bracket so that the
four bracket holes line up with the trans-
ceiver holes.
b. Replace the four screws (supplied M4 ×
8mm) in the screw kit so that the mount-
ing bracket is secured to the transceiver
unit.
c. Place the unit top-side up (bracket feet
down), utilizing the included flatwashers,
insert the four self-tapping screws (M5 ×
25mm is recommended) and tighten them
down.
3. Wiring
a. Connect the cables to the mounted transceiver unit using the supplied trunk mount
extension cable as illustrated.
Curly Cord
Socket
Power Cable Socket
Microphone Unit Jack
Extension Cable
Power Cable
2
Antenna Terminal
Hand Set
Hands-Free Mic
fuse 3A
Extension cord
Red
fuse 1A
Orange
Black
Car Battery
Cradle
Ground (Black)
Back up (Red)
Ignition (Orange)
Antenna
Transceiver unit
Advertisement
Table of Contents
