Table of Contents
Advertisement
Important
There are some basic rules that apply to most hardware installation procedures
and need to be observed to prevent damage or injury.
1.
Always make sure that any power is disconnected to the vehicle before handling any
electrical components like wiring, fuseboxes, connectors, etc.
2.
Never force any connection between components, electrical connectors or the like.
3.
Always use the proper tools for the task at hand. Using improper tools may cause
damage to yourself, your vehicle, or your cellular telephone system.
4.
Think through all the necessary steps of installation before actually beginning the
procedure and equip yourself for all steps to be performed.
5.
Always make sure your workspace and your tools are clean and tidy. The
introduction of dirt or grease may hinder the performance of your cellular telephone
and related components.
Installation Procedure
1. Before we begin
You will need the following items in order to properly install the cellular telephone in the
trunk of an automobile.
• Your CMT9300 kit includes the following parts:
1. Cradle
2. Mount Bracket
3. Power Cable
4. Extension Cable
5. Clamshell
6. Screw kit
7. HF Microphone
8. Installation Manual
• Your CMT9300 kit does not include the following parts:
9. Stand for Cradle
10. Screw (M5 × 25)
(CR93)
(MT93)
(EPC91)
(EIC91)
(CM5)
(SK93)
(MIC40)
(IMCMT9300)
1
Advertisement
Table of Contents
