Usage - Klarstein 10030102 Manual

Before using the unit for the first time:
Heat the empty oven
1. Insert the tray and wire rack.
2. Set the heater operating switch to "UPPER & LOWER", set the temperature control dial to
"230m °C" and heat the empty oven for about 10 minutes.
Note: There may be some smoke and a burning smell at first, but this is not a malfunction.
Temperature control dial
• Set the Temperature Control Dial for the dishes which you are going to cook.
Heat Operating Switch
Select "Upper" "Lower" or „Upper and Lower" according to the dishes you are going to cook. You
can observe whether the heaters are working or not by observing the front Indicator light.
1. Set the arrow on the timer knob to the number which indicates
the cooking time (minutes) according to the dishes you are going
to cook.
2. Set the
The oven
end of the
When setting the Timer to less than 5 min, turn it to more than 6
min. and then back to the selected time.
3. The oven can be turned off manually during cooking by turning
the Timer counter-clockwise to the "0FF" position.
Note:
If the inside of the oven is dirty, cooking may take slightly longer than
usual.
19
Timer by turning
will turn off
selected time and

Usage

it clockwise.
automatically at
a bell will
the
ring.