Getting Started - Shark NR120C Owner's Manual

Getting Started

A
B
D
E
F
FIRST THING'S FIRST, YOU NEED TO
KNOW WHAT'S IN THE BOX YOU JUST
OPENED:
A
Vacuum Body
B
Flexible Hose
C Telescopic Tube
D
Motorized Power Nozzle
E
Cleaning Attachments
(Crevice Tool, Dusting Brush, Upholstery Tool)
F
Power Brush
G
Bare Floor Brush
* Note: The crevice tool and dusting brush are stored
underneath the dust cup inside the unit when shipped.
Illustrations may differ from actual product.
4 TOLL FREE: 1-800-798-7398
NR120C_31_IB_E_F_120710_2.indd 4
Assembly
C
YOUR SHARK
ASSEMBLE:
1
G
2
3
4
5
6
NOTE: The tool caddy can be removed from the telescopic tube by
opening the latch and twisting it off. (Fig. 2) To re-attach the tool
caddy to the telescopic tube, twist it the tool caddy on and snap the
latch shut.
a
fig. 2
PET PROFESSIONAL CANISTER IS EASY TO
®
Place your vacuum canister on a level surface.
DO NOT plug in the vacuum until it is fully assembled.
Insert the end of the flexible hose (a) into the air intake duct.
Push it in until you hear it "click", indicating that it is locked in
place. (Fig. 1)
DO NOT over bend, over stretch, twist or step on the flexible
hose as it may crack or break.
Insert the end of the telescopic tube (b) that doesn't have a plug
into the end of the handle end of the flexible hose. Push it in
until it is secure and tight. (Fig. 1)
Push the end of the telescopic tube (c) into the motorized power
nozzle. (Fig. 1)
To adjust the length of the telescopic tube, hold the adjustment
collar (d), push toward the floor to extend or retract.
Remove the crevice tool and the dusting brush from underneath
the dust cup and store them along with the upholstery tool on
the tool caddy (e).
b
d
e
c
fig. 1
12-07-10 3:01 PM