Troubleshooting; Front Panel Leds; Not Connected - Nuvo NV-P3100 series Product Manual

TROUBLESHOOTING

FRONT PANEL LEDS

An important indicator of each Nuvo component's operation is the LED light on the front panel. The color of the
LED, and the solid or flashing state, provides a visual reference for the status of operation. Refer to the chart for an
explanation of the functions and LED status (See Figure 68).
LED Color State of Component
Not Lit
Solid White
Flashing White
Solid Red
Flashing Red
Solid Green
Flashing Green
Solid Blue
Flashing Blue

NOT CONNECTED

The NOT CONNECTED screen appears when the controller is unable to see the components in the system (See Figure
69). There are several potential causes and remedies for this state that are important for troubleshooting.
Check the power status of the component. It should have a solid white (blue if in Mute) LED light on the front
1.
panel.
Player Portfolio Audio System | Product Manual
Explanation
Component is not powered on.
Component is connected to the network and in normal operation.
Component processor is busy; it should return to solid white.
Hard failure. There is no network communication. Reboot by turning the power off and
back on.
Indicates that the component has lost network connectivity.
Uninitialized state. The LED turns a solid white when the component is added to a
system and acquires a network address.
Busy uninitialized state. This is normal during the setup process. The LED turns white
at completion of setup. It also means that the component is updating to a new version.
Do not unplug during this process. At the completion of the update, the LED returns to a
solid white state.
Component is muted. When it is taken out of mute, the LED turns to a solid white.
Indicates that the component is in Bluetooth discovery mode (only for
Bluetooth-compatible devices).
Figure 68
Figure 69
21