SECTION 2
Operrrrion
Locking Tabs
Figure 2-8.
Card Insbllnfion in Model 706
2.6.2
Scanner Card Removal
To remove the
scanner
card, first unlock it by pulling the latches out-
ward, then grasp the end of the card at the edges, and pull the card out of
the scanner mainframe.
2.7
MAINFRAME CONTROL OF SCANNER CARD
Detailed information
to program the Model 705 or 706 scanners is con-
tained in their respective
instruction
manuals.
The following
para-
graphs provide
the
information
specific to the Model 7169.
The Model 7169 is designed to operate in the matrix mode of the scanner
mainframe.
2.7.1
Matrix Mode
The mainframe scanner must be placed in matrix (O-Pole) mode to oper-
ate theModel7169.
Keepinmind
thatscannercardchannelnumbers
are
2-14